To replace a purse swivel clip, remove the old clip and note how it was attached, measure the strap width and the clip opening, choose a replacement that matches and has a rated load that is well above the weight you carry, attach it securely, and test it before you trust it with a loaded bag. If the strap end is frayed or torn, repair or replace that part first, because a new clip on a weak strap will not hold.
What a Swivel Clip Does
A swivel clip, sometimes called a swivel hook or a lobster clasp with a rotating base, joins a strap to a ring on the bag. The swivel lets the clip turn, so the strap does not twist. It carries the full weight of the bag and its contents, so it is one of the most important parts to get right. Clips fail because the spring wears out, the hook bends, the swivel wears or the strap end tears.
Tools and Materials
- A replacement swivel clip, sized to the strap and the bag ring
- Flat-nose pliers, and a small screwdriver if the clip is screwed on
- A seam ripper or small scissors, for removing stitching
- Strong thread and a needle, or a sewing machine with a heavy needle
- A tape measure or calipers
- A soft cloth, to protect the finish of the hardware
Step 1: Remove the Old Clip
- Look at how the clip is attached before you take it off. Take a photo for reference.
- If the strap is folded over the clip base and stitched, use a seam ripper to remove the stitches carefully.
- If the clip is held by a rivet or a screw, loosen or remove it, and keep any small parts.
- Check the strap end for wear, splits or stretched holes.
Step 2: Measure the Strap and the Clip
Measure the strap width at the point where it passes through the clip. Check that the opening of the new clip is at least as wide as the strap, with a snug fit, and that the clip ring is large enough to fit the bag ring, but not so large that it looks out of place. If the strap varies in thickness, measure at the thickest part, and allow for the fold.
Step 3: Choose a Replacement
- Material: solid metal, such as brass or steel, is generally stronger than a plated light alloy. Hardware made of lightweight cast metal may bend or snap under load.
- Rated load: choose a clip with a stated working load that is well above the weight of your bag and its contents. If no load is stated, be cautious.
- Finish: match the other hardware on the bag. See why handbag hardware tarnishes.
- Gate and spring: check that the gate opens and closes smoothly, and snaps shut firmly.
- Swivel: check that it turns freely, and without wobble.
Step 4: Attach the New Clip
- Thread the strap end through the base of the clip, as the old one was.
- Fold the strap end back, and line up the layers, with the edges even.
- Stitch the fold firmly with strong thread, using a box shape with a cross in it, or a series of rows, to spread the load. Make stitches short and even, and backstitch at both ends. See how stitch length affects seam strength.
- If the clip is attached with a rivet or a screw, tighten it firmly, and add a drop of thread-locking compound on a screw, if you have it.
- Trim loose threads, and smooth the strap end.
If the strap end is split or frayed, cut it back to sound material, or repair it. See how to fix a torn bag strap attachment. For rivets that are loose in the bag, see how to fix loose handbag rivets.
Step 5: Test the Clip Before Use
- Pull test: hold the clip and pull the strap firmly, with your hands, to check for slipping or movement.
- Load test: hang the empty bag from a hook, and add weight gradually, up to the heaviest load you usually carry, keeping your hand under the bag.
- Swivel test: twist the clip to check that it turns freely.
- Gate test: open and close the gate a few times.
- Inspect the stitching and the clip for bending, gaps or movement. If you see any, stop and fix it.
Fixing a Loose or Stiff Clip Without Replacing It
- If a clip is stiff, remove grit with a soft brush, and a very small amount of light lubricant on the swivel, wiped clean so that it does not stain the strap or the bag.
- If the gate spring is weak, or the clip is bent, replace it, because a weak clip can release the bag.
- If the clip is loose on the strap, check the stitching and the rivet, and re-do them.
Caring for Strap Hardware
- Keep metal parts dry, and wipe them with a soft cloth after rain.
- Check clips, rings and stitching every few months.
- Do not overload the bag.
- Replace hardware that shows cracks, rust or bending.
- Avoid letting a strap squeak or rub dry. See why a handbag strap squeaks.
When to Take It to a Professional
If the strap is leather and needs re-stitching with a heavy machine, if the bag is expensive or if you are not confident about the repair, a cobbler or a bag repair shop can do it quickly. For a belt bag, see how to replace a belt bag buckle.
Frequently Asked Questions
Can a Leather Bag Strap Be Repaired?
Often, yes. Worn or split ends can be re-stitched or replaced by a cobbler.
How Do I Stop a Purse Strap From Slipping?
Choose a grippier strap, add a shoulder pad or adjust the length. See why a shoulder bag keeps slipping.
Can I Add a Crossbody Strap to a Purse?
If the purse has rings or D-rings that are firmly attached, you can clip on a strap with swivel clips. Check that the attachment points are strong.
Conclusion
Replacing a swivel clip is a small repair, but it carries a lot of load. Match the size, choose strong hardware, attach it firmly with strong stitching and test it before you rely on it.
